PUBLISHED IN THE CLAREMORE DAILY PROGRESS, CLAREMORE, OKLAHOMA, MARCH 8, 2013.
INVITATION TO BID
Pursuant to the provisions of Sections 1500 to 1507, Title 19 O.S., bid for County purchases in excess of $10,000.00 are to be solicited by the County Clerk’s Purchasing Agent. The bids will be evaluated and awarded by the Board of County Commissioners at the time and date listed at the end of this invitation.
BID #608-Mobile Shelving & Roller Shelving
Dimensions Outside Dimensions: 70 7/8” Tall X 14 1/2” Deep X Width varies depending upon conﬁguration. Inside Opening Dimensions: 3 1/4” Tall X 14”’ Deep X 19 1/8” Clear each book opening is for books that are approximately 3” Thick X l3”Wide X 18 3/4” Tall.
Sides Outer Case - Sides shall be 18 gauge cold rolled steel full height.
Back Back – Shall be 20 gauge cold rolled steel; shall be full height of cabinet; one piece, with four edges formed with a 5/8" flange. Back shall be fastened to all sides, top, bottom and uprights at 12" intervals at each book opening.
Top Top - Shall be 20 gauge cold rolled steel; one piece with front and rear edges formed with a 5/8” reinforcing flange. The front edge shall form into a full width channel frame 5/8" wide face with a ½” reinforcing flange. The Top plate shall be fastened at every book opening.
Base Plate Base Plate - Shall be 16 gauge cold rolled steel, one piece. The front edge shall form into a full width channel frame with reinforcing flange; a Dust Shelf rests on top creating a surface for the inside bottom of the opening, running full width. The base plate shall be fastened at every book opening. Front Edge The front edge of each opening is equipped with vertical stainless rollers to assist in book insertion into the openings. They are 3/4” diameter and run full height to accommodate each book’s access.